How to Reset the Water Filter Light on Your Fridge (Samsung, LG, Bosch, Fisher & Paykel and More)
Share
Changed your fridge water filter but the “replace filter” light is still on? The light runs on a timer, not a sensor, so it does not know you fitted a new filter. You need to reset it by hand. The steps below cover the most common brands sold in Australia. Button names vary between models, so if these steps do not match your fridge, check the user manual for your model number.
Before you reset
- Fit the new filter first and run 4–5 litres of water through the dispenser to flush out air and carbon fines.
- Find your model number (usually on a sticker inside the fridge door or on the side wall) in case you need the manual.
Samsung
On most Samsung fridges, press and hold the button marked Filter Reset for about 3 seconds. On many models this label sits under another button such as Alarm or Ice Type. On Family Hub models with a screen, open the fridge manager app and reset the filter there. Samsung fridge water filters
LG
Press and hold the Filter or Filter Reset (3 sec) button for about 3 seconds until the indicator turns off. If the panel is locked, unlock it first. LG fridge water filters
Bosch
After changing the cartridge, press and hold the filter key on the control panel for about 3 seconds until the filter symbol goes out.
Fisher & Paykel
Reset steps differ between models. On models with a touch display, the filter reset is usually found in the settings or filter menu. On other models, press and hold the filter button until the alert clears. Check your user manual if you cannot find it.
Daewoo
If your fridge has a Filter Reset button, hold it until the filter light changes. On models without one, press and hold the Ice Maker Lock and Lock buttons together for about 3 seconds, then release when the light changes colour.
Haier
Press and hold the Filter button for 3–5 seconds until the reminder clears.
Maytag, Whirlpool and Kenmore
Press and hold the Filter or Filter Reset button for about 3 seconds. On some models the reset is shared with another button and labelled “hold 3 sec”.
Westinghouse and Electrolux
On most models, press and hold the Filter or Reset button until the filter indicator turns off. Models with a digital display may have the reset in the settings menu.
Still not resetting?
Make sure the control panel is not locked, hold the button a little longer, and check that the filter is fully clicked into place. If you need a replacement filter, browse our fridge water filters or call us on 02 9695 7740 and we will help you find the right one.