Product Description:
Value twin pack of genuine Zip MicroPurity 93701 0.2 micron water filters for residential Zip HydroTap G4 boiling, chilled and filtered systems made from February 2017 onward. Two cartridges cover a full year at the recommended 6-month change interval.
Reduces and removes:
-
Dirt, rust and sediment greater than 0.2 micron
-
Chlorine, taste and odour
-
Limescale
-
Lead
-
Cryptosporidium and Giardia
-
Contains naturally occurring antimicrobial properties to prevent bacteria growth inside the cartridge
Specifications:
-
Micron rating: 0.2 micron
-
Filtration capacity: approx. 4,163 litres per cartridge
-
Genuine Zip part - fits residential HydroTap G4 systems delivered after February 2017
-
Independently tested and certified by NSF to Standards 42 and 53
Replacement: replace each cartridge approximately every 6 months.
Zip 93701 MicroPurity Water Filter 0.2 Micron - 2 Pack
The genuine Zip 93701 MicroPurity 0.2 micron water filter twin pack. Provides a full year of filtration for Zip HydroTap G4 systems.
Zip MicroPurity Water Filter - Installation Instructions: https://www.zipwater.com/filter-instructions
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models and system model information.
Need Help Confirming Compatibility?
If you cannot find your model number or are unsure whether this product is suitable for your refrigerator or filtration system, please contact us before purchasing.
Contact Us for Compatibility SupportGeneral Installation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Installation Notes
- Filter location and replacement steps may vary depending on your appliance or filtration system model.
- Always compare the new filter with your existing filter before installation.
- Remove all protective caps, plugs and packaging before installation.
- Flush approximately 5–10 litres or 3–5 minutes of water after installing the new filter.
- Use with cold potable water only unless the product instructions specifically state otherwise.
- Check all connections carefully for leaks after installation.
- Always follow your appliance manufacturer's instructions where applicable.
Need Installation Assistance?
If you are unsure how to install this product, please send us your refrigerator model number, filtration system model number or a clear photo of your existing filter and connections.
Contact Us for Installation SupportProduct Certification Document
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.