Skip to product information
1 of 4

OMNIPURE - WATER FILTERS

4x Omnipure ELF Carbon Block with Phosphate 12.7" ELF-10M-P

4x Omnipure ELF Carbon Block with Phosphate 12.7" ELF-10M-P

Regular price $264.00 AUD
Regular price Sale price $264.00 AUD
Sale Sold out
Taxes included.
Quantity
View full details

 

Product Description

Omnipure ELF Carbon Block with Phosphate 12.7" ELF-10M-P

Omnipure ELF 10M Quick connect Replacement Water Filter. 

Suits the QL2 style Filter Heads. 

The Omnipure ELF 10M P water Filter Cartridge can Replace many Filter Types and will give the same quality filtration at a much more affordable price.

Some of the filters and systems that the ELF 10M P filters can replace are CCE10 Comcater, XQS-10, Everpure filters that fit the QL2 heads.

Made in the USA.

10 Micron remove Sediment, Chlorine, Chemicals, Bad Taste & Odours.

Builtin Scale inhibitor phosphate is ideal for coffee machines, steam ovens etc..

Maximum cartridge life is 12 months depending on the water quality.

Flow rate of 6.3 Lpm for Chlorine removal and is rated to reduce chlorine up to 37,800 LITERS

Maximum pressure 125 psi

325mm x 90mm

Omnipure ELF Series (Extra Large Format) 12.7" Carbon with scale inhibitor

The ELF-Series from Omnipure. Cost-effective, point-of-use water filtration for high volume applications.

Suitable For: The ELF-Series of filters from Omnipure was designed specifically for the higher volume requirements for the food service industry. In contrast to what the name implies, the new ELF's (Extra-Large Format) capacity of over 10,000 gallons (37,800 litres) and flow rates of up to approx 5.7 litres/minute, make it ideal for use in restaurants, cafes, coffee shops and vending machines.

This Omnipure ELF Filter Replaces: Boema XQS-10, the WFS QC3223P(Water Filter Services) Standard Maxiflow Filter,the Aqua Safe QC350, CD100 cartridge for CD10, CD40 Systems. Also suits ICEU series including ICEU-305 & ICEU-805

The ELF-Series is engineered in a two-piece configuration with a permanent head and a bayonet style replaceable polypropylene body. This configuration helps to reduce cost as simple body replacement is cheaper than replacing the entire filter apparatus. Replacement is fast and easy. The body is quickly detached from the head with the twist of a wrist, no tool required.

All Omnipure filter bodies are made with virgin, high-impact polypropylene which is especially ideal for use in applications where sanitary conditions are required. All materials of construction are NSF and/or FDA approved.

 

Filter Life:  Maximum 6-month service life

 

Technical Specifications: Engineered and manufactured to the same exacting standards as all Omnipure filters, the ELF-SeriesT expanded volume and higher flow rates are ideal for commercial applications such as equipment protection and water polishing. Each filter series is tested with a maximum pressure of 125 psi and a maximum temperature of 38 C.

 

Features and Benefits of the ELF-Series

 

Better tasting water

Protect equipment from hard water

Lead & cyst specific media available

Large - 8cm wide x 32.3cm length (3." x 12.7")

Capacities of up to 37,800 litres

Flow rates of up to 5.7 litres/min.

Two-piece bayonet-style replaceable body and permanent head

Best cost-to-performance ratio in the industry

 

Block GAC 10m with Scale Inhibitor

 

GAC with polyphosphate

Taste, odour & chlorine reduction

Scale inhibitor

Ideal for equipment protection

Compatible Models

Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.

If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.

Contact Us for Compatibility Support

Installation Guide

Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.

General water filter installation guide for refrigerator, under sink and whole house filters

Need Help Finding the Correct Filter?

Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.

Water Filter Distributors order guide and product support information

Whole House System Installation Manual

For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.

View Whole House Installation Manual

Twin Cartridge Under Sink Installation Guide

For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.

Twin cartridge under sink water filter installation guide

Important Notes

  • Filter location and replacement steps may vary depending on your appliance or system model.
  • Flush approximately 5–10 litres or 3–5 minutes of water after installation.
  • Use with cold potable water only.
  • Check for leaks after installation and reinstall if necessary.
  • Always follow your appliance manufacturer's instructions.

Certification & Quality Assurance

Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.

Water Filter Distributors certification and quality assurance information Aqua Blue H2O warranty information

Important Certification Notice

  • Certification details may vary depending on the specific product model.
  • Please refer to the product description, packaging or official documentation for model-specific certification information.
  • If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.