UNDERSINK & RV Water Filter System
with Pleated Sediment Silver Carbon Block Filter
Model Number: AB-TWCARAVAN(ABSILVER1025-5)
This Kit Includes: Twin housing assembly with stainless steel bracket,
Sediment & Silver Carbon Block Filters, Connection to suit standard garden hose fittings,
Spanner wrench and all connection 1/4" with S/S Faucet
AQUA BLUE H20
10x2.5" Polypropylene Sediment Filter Cartridge
General-purpose spun polypropylene sediment filter cartridge. Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10x2.5" Sediment replacement filter 10 micron x1
Suits all standard 10-inch housings
Premium filtration poly spun
Suitable for countertop or under sink water filter models
10" Sediment Filter
-
Manufactured from 100% pure polypropylene fibers
-
Filters out larger dirt and rust particles
-
High dirt-holding capacity and superior sediment filtration
-
Excellent bacteria and chemical resistance
-
Extends the life of primary filter cartridges
- 100% Polypropylene material for wide chemical compact
-
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Specifications
Filter Media: Polypropylene
Temperature Rating: 40°F – 175°F (4.4°C – 79.4°C)
Initial Pressure Drop: <1psi typical
Flow Rate: 7.5 Liters per minute
Features & Benefits
Silver as natural antibacterial and antifungal media.
Different solution in eliminating impurities and bacteria.
Keep bacteria away from the filter.
100% Factory checked ready for quick and reliable installation.
General Installation
1. Flush new cartridge for 10 minutes prior to use.
2. Replace cartridge when rated capacity is reached, or when flow becomes too slow.
3. Install in compliance with state and local laws and regulations.
Filter Cartridge Can Be Used For The Following Purposes
Bath, Kitchen, Drinking Water Systems, Laundry, Aquariums, Home Brewing
Specifications
- Model Number: ABSILVER1025-5
- Carbon Type: Activated Carbon
- Flow Rate: 75 gpm
- Operating Temperature: 40 - 100 ºF
- Max. Pressure: 125 psig
- Micron Rating: 5 Micron
- Size: Standard 2.5” x 10”
Directions: Flush after installation for 5 minutes. For best results, change cartridge at 6 monthly intervals.
Caution: Do not use with microbiologically unsafe water without adequate disinfection.
Warning: For correct operation of this, it is essential to observe manufacturers instructions.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models and system model information.
Need Help Confirming Compatibility?
If you cannot find your model number or are unsure whether this product is suitable for your refrigerator or filtration system, please contact us before purchasing.
Contact Us for Compatibility SupportGeneral Installation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Installation Notes
- Filter location and replacement steps may vary depending on your appliance or filtration system model.
- Always compare the new filter with your existing filter before installation.
- Remove all protective caps, plugs and packaging before installation.
- Flush approximately 5–10 litres or 3–5 minutes of water after installing the new filter.
- Use with cold potable water only unless the product instructions specifically state otherwise.
- Check all connections carefully for leaks after installation.
- Always follow your appliance manufacturer's instructions where applicable.
Need Installation Assistance?
If you are unsure how to install this product, please send us your refrigerator model number, filtration system model number or a clear photo of your existing filter and connections.
Contact Us for Installation SupportCertification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.