Advanced Polyspun filter reducing sediment, dirt and rust particles down to 10 micron – 10 x 2.5 Inch
Aqua Blue H2O Polyspun Sediment Water Filter Cartridge.
Fits in most standard 10″ drop-in filter housing systems.
Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 2.5 Sediment replacement filter 10 micron x1
Suits all standard 10 inch housings
Premium filtration poly spun
Suitable for countertop or undersink water filter models
Features & Benefits
• Manufactured from 100% pure polypropylene fibers
• Filters out larger dirt and rust particles
• High dirt-holding capacity and superior sediment filtration
• Excellent bacteria and chemical resistance
• Extends the life of primary filter cartridges
• 100% Polypropylene material for wide chemical compact
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Specifications:
• Model Number: ABPP1025
• Min/Max Flow: 0 – 90 Lpm
• Min/Max Temperature: 4 – 52°C
• Min/Max Pressure: 20 – 800 kPa
• Micron rating: 10 Micron
• Size: Standard 2.5” x 10”
Directions: Flush after installation for 5 minutes. For best results, change cartridge at 6 monthly intervals.
Caution: Do not use with microbiologically unsafe water without adequate disinfection.
Warning: For correct operation of this, it is essential to observe manufacturers instructions.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia
Compatible Models
Please refer to the product description above for compatible filter
numbers, refrigerator models and system model information.
Need Help Confirming Compatibility?
If you cannot find your model number or are unsure whether this product
is suitable for your refrigerator or filtration system, please contact
us before purchasing.
Contact Us for Compatibility Support
General Installation Guide
Please use the general guide below to help identify your filter type
and follow the correct replacement process. Filter location and
replacement steps may vary depending on your refrigerator or water
filtration system model. Always refer to your appliance manual for the
exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or
filter code and confirm the connector type. If you are unsure, please
contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed
installation manual below. Professional installation by a licensed
plumber is recommended.
View Whole House Installation Manual
Twin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation
guide below. This guide is suitable for systems supplied with a
dedicated faucet, diverter valve, tubing and installation kit.
Important Installation Notes
-
Filter location and replacement steps may vary depending on your
appliance or filtration system model.
-
Always compare the new filter with your existing filter before
installation.
-
Remove all protective caps, plugs and packaging before installation.
-
Flush approximately
5–10 litres or 3–5 minutes
of water after installing the new filter.
-
Use with cold potable water only unless the product instructions
specifically state otherwise.
-
Check all connections carefully for leaks after installation.
-
Always follow your appliance manufacturer's instructions where
applicable.
Need Installation Assistance?
If you are unsure how to install this product, please send us your
refrigerator model number, filtration system model number or a clear
photo of your existing filter and connections.
Contact Us for Installation Support
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an
Australian owned and operated company. Our products are supplied with a
strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
-
Certification details may vary depending on the specific product
model.
-
Please refer to the product description, packaging or official
documentation for model-specific certification information.
-
If you require confirmation for a specific product, please contact
Water Filter Distributors before purchasing.
