Aqua Pure AP110 Filter Cartridges
2 filters Per Pack. Dirt, Rust and Sediment Cartridges.
Nominal 5 micron
Installation and replacement procedure for the Aqua Pure AP110 water filter :
1. Turn shut-off valve clockwise to "Off: position.
2. Remove housing by sliding wrench up toward head then turn to the left.
3. Wipe housing clean and insert new cartridge.
4. Lubricate O-ring and screw housing into head.
5. Turn shut-off valve back to "On" position.
Important: There is a replacement indicator light for the water filter cartridge on the dispenser. The filter cartridge should be replaced when the filter light comes on, or every 6 months, or if you notice a decrease in flow of water.
The Aqua Pure AP110 Compatible with Unit s:
AP11T, AP11S, AP12T, AP12S, AP101T, AP101S, AP102T, AP102S, AP1610, AP2610, SST1, SST2, FHT-34-S, FHO-34-S-S, FHT-34SS-S, FHO-34-SS-S, USOM-38-S,UST-38, USO-14-S
AP110 Fits Housings/Systems: AP212, AP11T, AP11S, AP12T, AP12S, AP101T, AP101S, AP102T, AP102S, AP1610, AP2610, SST1, SST2, FHT-34-S, FHO-34-S-S, FHT-34SS-S, FHO-34-SS-S, USOM-38-S,UST-38, USO-14-S and most competitors systems that require 2.5" x 9.75" cartridges. Cuno part # 56204-04
most competitors systems that require 2.5" x 9.75" cartridges
3M Cuno part # 56204-04
Alternative Part #: AP110 OR FS110
Grainier Part #: 1P753 .
Aqua Pure AP110 Product Benefits :
Patent pending technology provides fi ne sediment fi ltration down to 5 micronGrooved cartridge increases surface area for longer cartridge life, by 132% over non-grooved and 47% over the previous designRigid construction helps to eliminate sediment “unloading” due to variances in water pressure
This fridge water filter is recommended by the manufacturer to be replaced every 6 months, or when the "change filter" light comes on.
SPECIFICATIONS:
| Flow Rate | 1.9 lpm |
| Operating Temperature | min 0.6°C / max 38°C |
| Operating Pressure | min 207 kPa (30 psi) / max 827 kPa (120 psi) |
| Technology | High quality Carbon Block |
| Function | Chemical and Mechanical Reduction |
| Capacity | 1,575 litres |
| Service Life | 6 months |
| Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. | |
Filter life: Most refrigerator manufacturers recommend that fridge water filters be replaced every 6 months or when the "change filter" light comes on. This ensures your water and ice taste clean, and that your fridge's ice & water dispenser stays in optimal working order.
NSF APPROVED
LOOK AFTER YOUR HEALTH ALWAYS BUY A FILTER THAT HAS BEEN APPROVED BY A WELL KNOWN STANDARDS FEDERATION OR WATER AUTHORITY NSF OR WRAS.
Not sure if this is the right filter? Email us at info@waterfilterforfridge.com.au or call us during business hours on 1300 767 072 to discuss your requirements further.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it. Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
We are only carry Genuine Australian standard NSF Approved water filters.
MORE INQUIRY?
1300-767-072
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.