ABGAC AQUA BLUE H20 - Taste & Odour Removal Cartridge
ABGAC
| Taste & Odour Removal Cartridge
Basic Range
For Mains Water Supply
This cartridge is designed to reduce taste, odour, chlorine and some sediment providing pure, clean, great tasting water.
Compatible with GA051 Granular Cabon Cartridge Fits AP117
10 x 2.5 Inch
Features & Benefits
• Material - Food Grade Plastic Shell BPA Free
• Special Material - Special PP Pad to remove big impurities
• Environmental - Environmental Friendly and Food Grade TPR Washers
• Filtration Life - 8-12 months/2500G, Depends on water quality and level of contaminants filter flow us up to 25 liters per minute.
• granular activated carbon water filter replacement cartridge used to reduce the bad taste and odor of chlorine in a variety of low-flow applications such as under the sink, countertop, and pre/post-reverse osmosis filtration systems
• AB-GAC10 for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with 10" housing.
• highly efficient reduction of chlorine taste and odor, as well as other tastes and odors of many organic chemicals and volatile organic compounds. All GAC filters are made with high-quality coconut shell carbon.
• This filter is a compatible replacement water filter cartridge 10-inch
• GAC Granular Activated Carbon Taste, Odor, VOC Coconut Shell Carbon Water Filter 10" Standard
Water filtered with Aqua Blue10 x 2.5 Inch. Granular Activated Carbon Replacement Filter Cartridge Can Be Used For The Following Purposes:
Bath, Kitchen, Drinking Water Systems
Laundry, Aquariums, Home Brewing
Specifications:
- • Model Number: AB-GAC10
- • Min/Max Flow: 2.5 gpm
- • Operating Temperature: 4 - 52°C(39 - 126°F)
- • Max. Pressure: 80 psi
- • Size: Standard 2.5” x 10”
- • Filtration Life: 3 - 5 months/2500G *Depends on water quality and level of contaminants.
- Directions: Flush after installation for 5 minutes. For best results, change the cartridge at 6 monthly intervals.
- Caution: Do not use microbiologically unsafe water without adequate disinfection.
- Warning: For correct operation of this, it is essential to observe manufacturer's instructions.
10" Big Blue 5 Micron PP Sediment Filter
-
• Three-layers structure cartridge, High contaminant holding capacity.
-
• 100% PP Polypropylene for compatibility with a wide range of process fluids.
-
• 5 Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings.
-
• Formed by thermal bond without use of any binders and adhesives.
-
• Certificated by NSF42 and FDA CFR Title 21. (Not printed on the filter label)
-
• Maximum operating pressure: 125 PSI
-
• Operating Temperature Range: 40-100°F
-
• Dimensions: 10" x 2.5"
-
• Maximum Flow Capacity: 7.5 Liters per minute
-
• Filters are individually wrapped
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
More inquiry about this filters? Call us 1300 767 072 or Email us sales@waterfilterforfridge.com.au
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.