
Aquila WFAQ7000 Maxiflow Filter QC3533CCW Compatible Replacement QF-5
Aquila Compatible Inline Twist Lock Filter
CODE: WFAQ7000 REPLACEMENT WATER FILTER WFAQ7000
PLEASE CHECK LOCKING KEYS ON OUR PHOTOS AND MAKE SURE THEY ARE THE SAME WITH YOUR FILTER.
FITS WELL WITH INTASINK
WFAQ7080 REGISTER AUSTRALIA WATER MARK WFAQ7000/XSENTIAL QF-5 REGISTERED WATER MARK AUSTRALIA PRODUCT
AS 3497 LIC 23066
REPLACEMENT WATER FILTER The Compatible WFAQ7080/WFAQ7000 is a 10 Micron Premium Carbon Block Water Filter.
Suitable Replacement For the Aquila WFAQ7080/WFAQ7080WF Water Filter Cartridge.
The AQUA BLUE H20 Compatible WFAQ7080WF water filter is a 10 micron carbon block with granular activated carbon used to reduce cysts, lead, taste, odour and chlorine.
Contaminant Reduction: - Chlorine Reduction - Cyst Reduction: Cysts (Cryptosporidium & Giardia) - Nominal Micron Rating: 1 Micron Carbon Block Water Filter
Applications
- Commercial and Residential Drinking Water Systems
- Pre- and Post- R.O. Filtration
- Water Coolers
- Food Service
Replaces
Hoshizaki IM30 - IM100, KM30 - KM125, DCM Series
HLF20 - Hoshizaki Complete Filter
Hoshizaki IM130 - IM240, KM515 - KM1300
HLFC100 - Hoshizaki Replacement Cartridges
This Filter Replaces: Boema XQS-10, the WFS QC3223P(Water Filter Services) Standard Maxiflow Filter,the Aqua Safe QC350, CD100 cartridge for CD10, CD40 Systems. Also suits ICEU series including ICEU-305 & ICEU-805, as well as the Maxiflow Filter Cartridge QC3533CCW, and QC6533PGB. Suitable as well for the Hoshizaki HLFC100 Sediment Chlorine Scale 10" filter.
MADE IN USA
Omnipure-ELF 10M-P
Specifications
| Micron Rating | >98% @ 10 Micron |
| Filter Dimensions | 3.125* O.D. x 2.875" I.D. x 12.7" L |
| Chlorine Reduction >95% | >10,000 gallons @ 1.5 GPM |
| Initial P | <4.0 psid @ 1.5 GPM |
| Carbon Weight | 0.75 Ibs. |
| Carbon Type | Activated Bituminous Coal Acid Washed |
| Scale Reduction | 6 Months |
Notes: Chlorine reduction capacity based on laboratory testing conducted using test protocol contained in NSF Standard 42.
This filtration block is tested and Certified by NSF International under ANSI/NSF Standard 42 for materials only.
Warning
Operating Temperature: 40-100F
Maximum Operating Pressure: 125 psig
- All information provided is based on data believed to be reliable. It should be used for evaluation and verification but not as a warranty.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Activated carbon block filters are not designed to remove bacteria or viruses.
- Actual performance results may vary based on the level of organic contaminants in the influent water, changes in pH and upon other conditions that may be encountered during actual use.
General Installation/Operation/Maintenance Requirements
- Flush new cartridge for 10 minutes prior to use.
- Replace cartridge when rated capacity of 10,000 gallons is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia







Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.