- Advanced Benefits
- Genuine UV GUARD UV lamp and sleeve
- Genuine AQUA BLUE H20 cartridges
- Kit-Buy Savings
Puretec Hybrid G7 Replacement Parts
Suits the Puretec Hybrid G7 whole-of-house filtration systems replacement filters and UV parts.
1 x 1st Stage: ABPL2045-5M Pleated Washable 5 micron sediment filter reduces dirt and sediment. (replace as a required maximum of 12 months)
Washable Sediment Prefilter
Extend the life of your sediment prefilter by rinsing the dirt from the cartridge regularly. We recommend rinsing out the pleated cartridge using a garden hose. You can also use a scrubbing brush to gently dislodge any large sediment particles. Run the brush-up and down the length of the pleated cartridge with the bristles in between the pleats. Be careful not to damage the filter fabric by scrubbing it too thoroughly.
1 x 2nd Stage: ABCTO2045-10M 10-micron Whole House 20” x 4.5" COCONUT CARBON BLOCK Filter NSF42
Features & Benefits
• Combined with High-quality PP sediment filter and GAC function together.
• Remove dust, and odors at the same time.
• High void volume, low-pressure drop, and excellent dirt holding capacity.
• Formed by wrapping PP-GAC without the use of any binders and adhesives.
• High chlorine reduction.
• Coconut shell activated carbon.
1 x 11066 (RL6) AQUA GUARD Brand UV LAMP for Puretec 46 to 50 watt UV Lamp with 4 pins at one end. Dimensions 525mm (including pins) x 18.5mm (replace at 12 months)
1 x 21017 (RQS6) AQUA GUARD Brand Quartz sleeve (needs to be cleaned every 12 months and replaced if damaged or unable to clean to transparency)
2 x 830 sleeve o-rings AQUA GUARD Brand (replace every time you remove the quartz sleeve for cleaning)
This filter set suits the Puretec Hybrid-G7, Hybrid-R2 systems, and more Suits HR-G7R2 and R1 20″
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.