Genuine Omnipure K2540 Inline Carbon water filter cartridge with PLV Water Filter FMP 350
The OMNIPURE K2540-JJ Description
- For installation on cold water lines only.
- Connections: 1/4" Female Quick Connect (inlet and outlet)
- Filter Media: Coconut Shell Granular Activated Carbon (GAC)
- Bad Taste and Odour.
- Filter Life: About 1 year depending on local water quality and frequency of use
Product Description
This Omnipure K2540-JJ Inline Water Filter is a coconut shell granular activated carbon water filter which reduces the bad taste and odor of chlorine along with dirt, sediment, rust, sand, and other contaminants in your water.
The Omnipure K2540-JJ GAC filter can be used as an inline filter with most refrigerators, icemakers, water dispensers, undersink systems, and more, but is also commonly used as a filter in certain reverse osmosis systems. The K5605JJ coconut carbon filter installs easily - it requires no tools due to the Quick Connect fittings which are built into the filter body to reduce the chance of leaks.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty
The OMNIPURE K2540-JJ Water Filters Operating Specifications are as Follows:
| Flow Rate | 5 GPM |
| Operating Temperature | 40 - 100 F |
| Technology | Carbon Block |
| Function | Chemical and Mechanical Reduction |
| Service Life | 1 Year |
| Filter Dimensions | 2" W X 10" L |
| Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. | |
1/4" Tube 350kpa / 50 PSI Pressure Limiting Valve PLV Water Filter FMP 350
Stefani 350kpa Filter Accessory Press Reduce Valve
Replacing Filtamate FMP350 OR FMP 350
Watermark Certified
350kpa water pressure reducing valve
· High quality materials
· Light weight
· Easy installation
Pressure Limiting Valve 350Kpa 50psi Filter Protection Valve
- Pressure Reduction Valve with 1/4" Quick Connect Push Fit In and Out
Suitable for High pressure systems to protect drink dispensers e.g. Water filters, ice makers, coffee machines and reverse osmosis machines. Prevent water hammer and back flow.
- Australian/New Zealand Watermark Approved
Highly recommended when installing water filter systems.
- Integral Check Valve
- Resists water hammer.
- Stops backflow.
Pressure limiting valve in 350kpa with back flow prevention.
Watermark AS1357.2 Lic 23133
NSF : Certified to NSF/ANSI 61 Section 9
Limiting valve: 350kpa (50 PSI)
Flow: 7.5L/Min at 700 Kpa (100 PSI)
Max Pressure: 1600 Kpa (230 PSI)
Max Temperature: 40C
 |
EXTERNAL WATER FILTER + HOSE (5M 1/4") KIT SET $50 
|
 |
APEX FMP 350 KPA WITH 1/4" TUBE PORTS $39
|
 |
JOHN GUEST (1M 1/4") HOSE TUBING HIGH PRESSURE $5
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.