Genuine Omnipure Q5550 Q-Series 1/2 lb KDF / GAC Filter replaces Q5567
Details
- Fine filtration of treated drinking water to ingredient water quality
- Helps standardize beverage quality at disparate locations
- Reduces maintenance problems in water-using equipment
- Removes more than 95% of disinfectant chlorine
- Takes out common earthy, fishy, musty tastes and odors
- Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
- Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction
- KDF 55 reduces heavy metals, control bacteria and algae growth and remove chlorine and chloramine taste & odor.
Typical Appications
- Pre and Post filtration for RO
- Drinking fountains
- Ice Machines
- Other point-of-use applications
- Food services
Specifications
- Part Number: Q5550 / Q5567
- Dimensions: 2.5" x 10"
- Filtration Media: Granular Activated Carbon 12 x 40 Mesh and 0.5 Lb of KDF 55
- Maximum Pressure: 125 PSI
- Temperature: 30-100°F (2-38°C)
- Service Flow Rate: 0.5 GPM (1.9 LPM)
- Threaded fittings must be wrapped with Teflon tape before installation
- Install Teflon taped fittings and tighten firmly
- Flush new cartridge with 5 gallons of water prior to use and check for leaks.
- Replace cartridge when rated capacity is reached, or when flow becomes too slow
- Install in compliance with state and local laws and regulations
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
MORE INQUIRY?
1300-767-072
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.