OMNIPURE K2533JJ INLINE WATER FILTER WITH QUICK-CONNECT with PLV Water Filter FMP 350
AS K2540 JJ IS SAME SPEC AS K2533 WE ARE SENDING K2540 JJ INSTEAD OF K2533
Omnipure K-Series K2533-JJ GAC Filter Cartridge, also known as K2533, is commonly installed as post filter for under sink Reverse Osmosis systems. Omnipure inline filter uses 1/4" quick connect fittings that make filter exceptionally easy to install on copper or plastic WATER lines.
OMNIPURE K2533-JJ INLINE FILTER FEATURES:
Micron Rating: 5 micron
Flow: 0.5 GPM
Coconut shell Granular Activated Carbon
Taste, Odor and Chlorine reduction
Filter Life: 1500 gallons
Maximum water pressure: 125 PSI
Connector: 1/4" John Guest (push fit) FQC
Filter Size: 10" x 2" (nominal)
K2533JJ, K 2533 JJ
DETAILS
K2533JJ Omnipure Water Filter
· Ships same day
· Reduces contaminants that impact drinking water flavor and order
· Transforms your drinking water into a premium tasting beverage or ingredient
· Made in the U.S.A.
· Genuine OEM Product
SPECIFICATIONS
|
Package Qty |
1 |
|
Used In Brands |
Omnipure |
|
Manufacturer's Id |
K2533JJ |
|
UPC |
799932587542 |
|
Advertised Size (in) |
10 x 2 |
|
Actual Size (in) |
10 inches (length) x 2 inches (outside diameter) |
|
Actual Size (cm) |
25.4 x 5.08 |
|
Media |
Acid Washed GAC Mesh |
|
Primary Filter Media |
Granular Activated Carbon |
|
Filter Life (gallons) |
1,500 |
|
Filter Life (liters) |
5,678.12 |
|
Filter Life (months) |
12 |
|
Micron Rating (Nominal) |
0.5 |
|
Operating Temperature (°F) |
35 - 100 |
|
Operating Temperature (°C) |
1.7 - 37.8 |
|
Flow Rate (gpm) |
0.5 |
|
Flow Rate (lpm) |
1.893 |
|
Fitting Type |
Quick Connect |
|
Fitting Size (inches) |
1/4 |
CONTAMINANTS
Reduces the following contaminants:
· Bad Taste and Odor
· Chlorine Taste & Odor
· The OMNIPURE-K2533JJ does not reduce fluoride.
THE OMNIPURE-K2533JJ IS COMPATIBLE WITH THE FOLLOWING PART NUMBERS
|
01-0000-79 |
AC Series |
AC15 |
AC30 |
|
AC36 |
H-30S |
H-5 |
H-53 |
|
H-8 |
H-83 |
H-83SR |
K2533JJ |
|
K2533-JJ |
HTD635WISS |
WF001 |
ESE6077SA |
|
WSE6970SA |
1/4" Tube 350kpa / 50 PSI Pressure Limiting Valve PLV Water Filter FMP 350
Stefani 350kpa Filter Accessory Press Reduce Valve
Replacing Filtamate FMP350 OR FMP 350
Watermark Certified
350kpa water pressure reducing valve
· High quality materials
· Light weight
· Easy installation
Pressure Limiting Valve 350Kpa 50psi Filter Protection Valve
- Pressure Reduction Valve with 1/4" Quick Connect Push Fit In and Out
Suitable for High pressure systems to protect drink dispensers e.g. Water filters, ice makers, coffee machines and reverse osmosis machines. Prevent water hammer and back flow.
- Australian/New Zealand Watermark Approved
Highly recommended when installing water filter systems.
- Integral Check Valve
- Resists water hammer.
- Stops backflow.
Pressure limiting valve in 350kpa with back flow prevention.
Watermark AS1357.2 Lic 23133
NSF : Certified to NSF/ANSI 61 Section 9
Limiting valve: 350kpa (50 PSI)
Flow: 7.5L/Min at 700 Kpa (100 PSI)
Max Pressure: 1600 Kpa (230 PSI)
Max Temperature: 40C
 |
EXTERNAL WATER FILTER + HOSE (5M 1/4") KIT SET $50 
|
 |
APEX FMP 350 KPA WITH 1/4" TUBE PORTS $39
|
 |
JOHN GUEST (1M 1/4") HOSE TUBING HIGH PRESSURE $5
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.