Omnipure OCB934 RO T40 5 Micron Granular Activated Carbon Water Filter Replacement Cartridge 10"
This filter will replace AR-100 Aquaspace as well. Fit all standard industry water filter housings 10"
GAC (Granular Activated Carbon) is simply carbon in the form of granules. Granular Activated Carbon cartridges generally have very high capacities for the reduction or removal of aesthetic contaminants such as poor tastes, odors or colors. For these reasons, GAC filters are referred to as “taste and odor” filters.
Our Carbon filters employ a high grade carbon with industry-leading surface area allowing for the greatest efficiency of the carbon absorption.
These cartridges function poorly for the reduction of contaminants of health concern but Granular Activated Carbon filter cartridges serve well as pre-filters to carbon block filters or other technologies. They are best suited for high flow rate requirements, such as Point Of Entry (POE) applications.
Removes
- Chlorine
- Algae
- Chemicals
- Dirt
- Odour
- Pesticides
- Rust
- Sediment
- Unpleasant taste
Do not rely on carbon cartridges to filter untreated or unknown water sources for human consumption.
Cartridge Guide
Filter cartridge manufacturers rate cartridges in "microns". Microns are a size measurement of the pore size, so the smaller the number, the tighter the filter. One-micron filters are for drinking water only. In general, they are too tight to filter large amounts of water without slowing the flow to unacceptable levels.
Filter cartridge manufacturers also use the words "absolute" and "nominal" to describe their products' micron ratings. Absolute means absolute. Nominal means "more or less."
Drinking Water Filter Cartridges
GAC Series Cartridges are available in a variety of sizes and flow rates, and effectively provide good general-purpose drinking water filtration. If you require filtration for a single stage drinking water filter, you should use a Carbon Block cartridge.
| Model | Omnipure OCB934 RO T40 5 Micron Granular Activated Carbon Water Filter Replacement Cartridge 10" |
| Water Filter Cartridge Size | 2.5" x 10" |
| For Water Type | City Scheme (Chlorinated) Water |
| Dimensions | 10" |
| Filter Cartridges | Granular Activated Carbon (GAC) Cartridges |
| Longevity | 12 Months |
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
More inquiry about this filters? Call us 1300 767 072 or Email us sales@waterfilterforfridge.com.au
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.