Omnipure Quick Change Triple Under Sink Replacement Filter Set Q5540 + Q5520 + Q5586
This is a replacement filter set to suit an Ompnipure 10" Quick Change Triple Under Sink Water Filter System. The Omnipure Q-Series Triple Set is a suitable upgrade to the older set up which use the Q5505 pre filter.
Omnipure Quick Change Triple Under Sink Replacement Filter Set Q5540 Q5520 Q5586
This is a replacement filter set to suit an Ompnipure 10" Quick Change Triple Under Sink Water Filter System.
The Omnipure Q-Series Triple Set is a suitable upgrade to the older set up which use the Q5505 pre filter.
Package contains three filters:
1 x Omnipure Q5505 SEDIMENT
1 x Omnipure Q5540 granular activated carbon Chlorine, taste, color, and odor reduction
1 x Omnipure Q5520 Cyst, chlorine, taste, color, odor and VOC reduction 1MICRON
These water filters are compatible with the following model:
Omnipure Quick Change filters are easy to replace and only require the water supply to be turned off. We recommend you replace your filters every 6 - 12 months depending on water quality and usage.
Made in USA by Omnipure
FIRST STAGE
Flow Rate |
0.5 gpm |
Maximum Operating Pressure |
125 psig |
Operating Temperature |
2 to 38 ºC35 to 100 ºF |
Rated Capacity |
Dependent upon the quality of the influent water |
Reduction Claim |
Dirt, sand, and sediment reduction |
Filter Diameter |
2.5 in |
Available Lengths |
6 in8 in10 in12 in14 in |
Available Thread Size |
1/8 in1/4 in |
Thread Type |
National Pipe Thread (NPT) - Female |
Filter Head Type |
Non-ValvedValved |
The Q-Series is the ultimate "user friendly" inline filter on the market. Replacement is as easy as unscrewing the filter body from the permanent head and screwing in the replacement. The Q-Series is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. No tools. No drips. No hassles. The Q-Series is available in 2.5" diameter, and in lengths of 6", 8", 10", 12" and 14".
Sizes shown include 10
SECOND STAGE
ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards
THIRD STAGE
Flow Rate |
0.5 gpm |
Maximum Operating Pressure |
125 psig |
Operating Temperature |
2 to 38 ºC35 to 100 ºF |
Rated Capacity |
2,500 gal/1 Year |
Reduction Claim |
Cyst, chlorine, taste, color, odor and VOC reduction |
Flow Capacity |
2,500 gal |
Filter Diameter |
2.5 in |
Available Lengths |
6 in8 in10 in12 in14 in |
Available Thread Size |
1/8 in1/4 in |
Thread Type |
National Pipe Thread (NPT) - Female |
Filter Size |
1 µ |
Filter Head Type |
Non-ValvedValved |
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it. Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.