Pure 91451/N 4.5"x 20"
Big Blue Coconut Carbon Block HI FLOW FILTERS
The Pure 91451/N 4.5"x 20" Benefits :
- Great performance in reducing sediments, color, SOCs (soluble organic compounds) like pesticides, dioxins
- Decrease VOCs (volatile organic compounds) such as chloroform and petrochemicals
- Uniform and solid media structure
- Do not exhibit problems such as channeling, fluidizing, bypassing, and the release of carbon fines.
- NSF-42 approved and made of FDA-compliant materials. The filters media is manufactured from acid washed high purity coconut-based activated carbon. A combination of modern manufacturing processes and choice of high quality materials provides High Quality Coconut Shell Filters the ability to effectively reduce taste and odor from water through adsorption of the compounds that cause problems.
Product Description :
Our Coconut carbon blocks are manufactured with a high purity Coconut Shell Activated Carbon. With a high chlorine reduction, great dirt-holding capacity, and greatly reduced carbon fines, you will soon make our Carbon Blocks your preferred choice!
These are ideal for point-of-use (POU) and Reverse Osmosis applications. These cartridges can be used in a wide range of applications such as residential, food services, commercial, and industrial. These Carbon Blocks are great for displacing traditional GAC (Granular Activated Carbon ) and PAC (Powdered Activated Carbon ) filters in application where high chlorine reduction is needed.
The Pure 91451/N 4.5"x 20"Construction Materials:
- Filter Media: Acid-washed coconut-based carbon
- Outer Wrap: Polypropylene
- Inner Wrap: polypropylene
- Netting: Polypropylene
- End Caps: Polypropylene
- Adhesive (end cap): Ethylene Vinyl Acetate (EVA)
- Gaskets (O-ring): Polyisoprene (natural rubber, NR)
- Temperature Rating: 40 - 125 degrees F
Specification:
- 100% Coconut shell carbon
- 5 micron nominal filtration
- Chlorine, color & odor reduction
- No release of carbon fines
- Performance tested & verified by independent laboratory testing
- ISO 9001:2000 Standard
ASIN:B005XTZSZA
Directions for use:Place cartridges in an appropriate housing and flush for a minimum of 10 minutes prior to use. Use only with microbiologically safe and adequately disinfected water.
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
The Pure 91451/N ABCTO2045-5M 4.5"x 20" Water Filters Operating Specifications are as Follows:
| Flow Rate | 5 Micron |
| Operating Temperature | 40 - 125 F |
| Technology | Carbon Block |
| Function | Chemical and Mechanical Reduction |
| Suit | filtering dam, tank, bore and town water |
| Filter Dimensions | 4.5 inches x 20 inches |
| Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. | |
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.