Single Water Filter System for Homes and Offices

10"X2.5" Washable Pleated Sediment Filter

Gets rid of the harmful contaminants that may be in your tap water such as:

• Chlorine: 99%
• THMs (trihalomethanes) ECBs, OCBs, TMEs: 90% to 99%
• Pesticides: 90% to 99%
• Herbicides: 90% to 99%
• Industrial Solvents (halogenated hydrocarbons) PCBs (polychlorinated biphenyls) PAHs (polycyclic hydrocarbons): 90% to 99%
• Discolouration: 95% plus
• Rust Particles, Silt, Algae: 99%
• Benzene, Petroleum Solvents, Oil Residues: 85%

Your new filter will restore the water to its fresh natural state, improving the taste of your drinks and cooking.

Compact design requires little space under the sink.

No Plumbing required to install.

The system has been thoroughly tested.

Our efficient, free reminder system prompts you to change the cartridge. (Changing cartridges is very easy and only takes a couple of minutes).

Features summary:

• 3 litres per minute flow rate - That's fast enough. No waiting around
• Compact design requires little space under sink
• Simple installation: No plumbing required
• Easy cartridge changes
• Economical - a replacement cartridge lasts 6 months. Save $$s on bottled water - plus it's healthier. 
• Guaranteed for 3 years - Buy with confidence. If there are any problems we'll replace it for you.

Applications

• Food and beverages
• Reverse Osmosis Pre filtration
• Oil and gas
• Fine chemicals
• Electronics
• Metal finishing
• Pulp and paper

Everything You Need is Included in Your New Kit

Here's what you get

• One High Quality Undersink Housing Unit - will last you a lifetime
• One DIY water supply connector - no plumbing required
• All the tubing you need. We supply 2 x 1m lengths. 

Dimensions of Housing

Height Approx 14 inches (35cm) at Highest Point

Width 4.5 inches (110mm) at Widest Point

Cartridge Dimensions

Height 9 and 3/4 inches (248mm)

Width 3 inches (75mm).

About Replacement Cartridges

10" x 2.5" Washable Pleated Sediment Filter 10 Mic

Pleated sediment filter cartridges are constructed from pleated polypropylene, this technique means there is no center core to restrict filter performance.
These filters are a terrific opportunity to purchase extremely high quality filters at a VERY low price. They are best suited for tank water, rivers, creeks or streams. Anywhere where there is a heavy level of debris or sediment in the water, which may cause standard filters to block prematurely.
Pleated filters have up to 20x's more surface area than a standard polyspun filter!
This gives them a higher surface area to catch more debris and a much longer life duration before replacement is necessary. They can be washed and removed tima and time again, until they begin to perforate, then they will need to be replaced.

10 Micron Pleated Sediment Filter 10″ X 2.5″

- Washable Pleated Sediment Filter
- Pleated design maximizes dirt-holding capacity.
- Ideal for pre-filtration in high sediment applications.
- Durable polyester media is bacteria and chemical resistant.

MATERIALS OF CONSTRUCTION

- Filter Media
- Non-Woven Polyester Fabric
- End Caps
- Vinyl Plastisol
- Core Polypropylene

Specification

- Model Number: ABPL1025-10
- Operating Flow: 0 - 90 Lpm
- Operating Temperature: 0 - 50°C
- Operating Pressure: 20 - 800 kPa
- Micron Rating: 10 Micron
- Size: Standard 2.5” x 10”

This  listing  has  same spec as Dura Single Filter Housing with Cartridge wth standard  1/2" BSP 

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.

Just email: info@waterfilterforfridge.com.au (please allow for freight component)

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

waterfilterforfridge.com.au

We are the cheapest fridge part dealer in Australia