MADE IN USA
Caravan Filter replacement filters Carbon block with Sediment combo
DISPATCH IN 24 HOURS
First stage
AQUA BLUE H2O 10" POLYSPUN POLYPROPYLENE SEDIMENT CARTRIDGE 10 MIC WATER FILTER
10" 10 Micron Polypropelena Sediment Filter Cartridge
General-purpose spun polypropylene sediment filter cartridge. Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 2.5 Sediment replacement filter 10 micron x1
Suits all standard 10 inch housings
Premium filtration poly spun
Suitable for countertop or undersink water filter models
10" 10 Micron Sediment Filter
-
Manufactured from 100% pure polypropylene fibers
-
Filters out larger dirt and rust particles
-
High dirt-holding capacity and superior sediment filtration
-
Excellent bacteria and chemical resistance
-
Extends the life of primary filter cartridges
- 100% Polypropylene material for wide chemical compact
-
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
The OMNIPURE OMB 934 Description :
- Chlorine, Taste and Odor Reduction
- VOC Reduction
- Minimal Release of Carbon Fines
- Cyst Reduction - Cryptosporidium & Giardia
- OMB934 1micron
- Made in USA by Omnipure
- NSF Certified and Tested
The OMNIPURE OMB 934 replacement water filter is suitable for :
- Water Heaters and Coolers
- Residential and Commercial Water Filter Systems
- Pre and Post Reverse Osmosis Filtration
- Food Service Industry
General Installation :
- Flush new cartridge for 10 minutes prior to use
- Replace cartridge when rated capacity is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations
The Omnipure 10" OMB 934 1 Micron Carbon Block Cartridges are extremely effective at removing unwanted tastes, odours, chemicals giardia, cryptosporidium and other substances. Omnipure carbon blocks use fine premium coconut carbon to provide better tasting water.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
The OMNIPURE OMB934 Water Filters Operating Specifications are as Follows:
| Max Operating Pressure | 250 psig |
| Operating Temperature | 40 - 125 F |
| Technology | Carbon Block |
| Function | Chemical and Mechanical Reduction |
| Capacity | 15,000 gallons @ 1.0 GPM |
| Filter Dimensions | 9.75" Height x 2.75" Diameter |
| Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. | |
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
MORE INQUIRY?
1300-767-072
|
|
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.