
UV Guard UVG SLT30
Ultraviolet Light System - 34 LPM 30 Watt
UVG SLT30, UV system (small house, 34 lpm) with 316 grade stainless steel reactor, 3/4” male BSP inlet and outlet connections in a “U” formation, 30W UV lamp, quartz, o-ring and heavy duty poly mounting brackets.
The SLT-Series is a cost effective and high performing UV water disinfection system. With 8 models in the range and options to allow indoor and outdoor installation, the SLT-Series is ideal for under sink, whole of house, swimming pool and pond clarification uses.
SPECIFIC CHARACTERISTIC
• 316 grade stainless steel UV reactor (304 for SLT1 and SLT2 models).
• Available in BSP inlet and outlet connections is U configuration.
• Low pressure, low pressure high output or low pressure amalgam UV lamps.
• Variety of indoor and weatherproof controllers available.
• Customisable features including lamp safety interlocking device, remote on/off, SMS fault module, reactor temperature safety system, Modbus module, fault volt free contacts, personalised software.
APPLICATIONS
|
Residential |
UVG SLT30 UV Disinfection System Including Outdoor IP65Power Supply
MAXIMUM FLOW RATES
• Potable Water – 16 litres per minute
• Non-potable Water – 21 litres per minute
THE POWERS OF UV DISINFECTION
UV disinfection is a technology that uses Ultra-Violet light in the germicidal wavelength range between 200 and 300 nanometers. The optimum UV wavelength for UV disinfection is 264 nanometers which is located within the UV-C spectrum.
When microorganisms are exposed to germicidal wavelengths, they are destroyed outright or rendered incapable of reproducing. The high energy associated with UV-C UV light is absorbed by the DNA of bacteria, viruses, spores and other pathogens. This absorption causes abnormalities within the DNA to occur, resulting in the microorganism being incapable of reproducing and infecting.
A certain UV dose will provide a 99.9% reduction in bacteria
MAXIMUM FLOW RATE – 16 l/min @ 40mJ/cm2 FOR
• Town water supplies with 80% UVT (Ultraviolet Transmittance)
• Rainwater tank supplies with 90% filtered water UVT (Ultraviolet Transmittance)
MAXIMUM FLOW RATE – 21 l/min @ 30mJ/cm2 FOR
• Pond, irrigation and non-potable water treatment
SPECIFICTIONS
• 316SS UV reactor with heavy duty poly mounting brackets
• Connections: 3/4” BSP male threads
• Dimensions: 60cm’s x 6.3cm’s
• IP65 Weatherproof controllers
• Warranty: 1 year
• WaterMark Certified
• UV LAMP REPLACEMENT FREQUENCY
UV Lamps should be replaced every 12 months.
Please click below if you need single lamp itself.
UV Guard UV Lamp 11030 4 Pins 30 Watt - 515mm To Suit SLT30
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.