WFAQ10 REPLACEMENT FILTER Compatible Model for P5
The Pentek P5 water filters reduce extra fine dirt, sand, sediment, silt, rust particles, and scale particles. The Pentek P5 water filter is resistant to chemicals and corrosion.
THIS FILTER REPLACES WFAQ10 SEDIMENT FILTER AS WELL.
10" -10 Micron Polypropelena Sediment Filter Cartridge
General-purpose spun polypropylene sediment filter cartridge. Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 2.5 Sediment replacement filter 10 micron x1
Suits all standard 10 inch housings
Premium filtration poly spun
Suitable for countertop or undersink water filter models
10" 10 Micron Sediment Filter
-
Manufactured from 100% pure polypropylene fibers
-
Filters out larger dirt and rust particles
-
High dirt-holding capacity and superior sediment filtration
-
Excellent bacteria and chemical resistance
-
Extends the life of primary filter cartridges
- 100% Polypropylene material for wide chemical compact
-
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Specifications
Filter Media: Polypropylene
Temperature Rating: 40°F – 175°F (4.4°C – 79.4°C)
Initial Pressure Drop: <1psi typical
Flow Rate: 7.5 Liters per minute
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.