ZIP 93704 Replacement Water Filter Cartridge
Chemical & Mechanical Water Filter
Reduces: Sediment, Chlorine, Limescale, Taste & Odour
Filter Replacement Instructions
1. Shut off the water supply
2. Grasp existing filter and remove by rotating left until it stops and pull down releasing it from the filter head
3. Align replacement filter guide channels with the corresponding posts of the filter head
4. Insert the filter upward until it fully seats into the head, then rotate right until it stops
5. FLUSH 10 litre of water through the filer before use
Operating Specifications
• Model Number: AB1012
• Temperature: 2 - 38°C
• Pressure: 172 - 860 kPa
• Flow rate: 3.8 L/min
• Capacity: 6,800 Litres
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Replacement: The filter cartridge must be replaced every 12 months, at the rated capacity, or sooner if a noticeable reduction in flow rate occurs.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia
Compatible Models
Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.
If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.
Contact Us for Compatibility SupportInstallation Guide
Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.
Need Help Finding the Correct Filter?
Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.
Whole House System Installation Manual
For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.
View Whole House Installation ManualTwin Cartridge Under Sink Installation Guide
For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.
Important Notes
- Filter location and replacement steps may vary depending on your appliance or system model.
- Flush approximately 5–10 litres or 3–5 minutes of water after installation.
- Use with cold potable water only.
- Check for leaks after installation and reinstall if necessary.
- Always follow your appliance manufacturer's instructions.
Certification & Quality Assurance
Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.
Important Certification Notice
- Certification details may vary depending on the specific product model.
- Please refer to the product description, packaging or official documentation for model-specific certification information.
- If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.