Skip to product information
1 of 18

AQUA BLUE H2O - WATER FILTERS

ZIP GlobalPlus Generic Replacement Water Filter 91292

ZIP GlobalPlus Generic Replacement Water Filter 91292

Regular price $79.00 AUD
Regular price Sale price $79.00 AUD
Sale Sold out
Taxes included.
Quantity
View full details

ZIP 91292 REPLACEMENT WATER FILTER

Reduces: *Sediment *Offensive Taste & Odour *Bacteria *Chlorine
*Benzene *Girdia & Cryptosporidum
Contains: Scale inhibition media .

Zip replacement 91292 chilled and ambient filtered water systems incorporate advanced triple action filtration to protect you and your equipment from harm and damage.

This Cartridge Filter reduces dirt, rust, sediment, chemicals, chlorine, taste & odours from your water supply while protecting you and your appliance from harm.

The superfine 0.5 Micron filter rating ensures that bacteria such as cryptosporidium and giardia are removed from your water supply.

The AQUA BLUE H2O AB912WF / CC-QZP91G  Zip Filter REPLACEMENT  CARTRIDGE  is produced from high quality carbon granuals.

Carbon adsorbs chemicals and chlorine from our water to ensure safe and great tasting water. Over a 12-Month period, carbon loses its ability to adsorb and needs to be replaced. For health reasons, never use carbon filters which are more than 12 months old. 

This filter Suit for  

Generation 4 HydroTap

Australian/NZ Watermarked & Tested

AB912WF_4Stage-filter_aquablueh2o.jpg

 

 

 

Filter Replacement Instructions:

The Zip HydroTap Generation 4 notifies when filter replacement is due. The default setting is 6,000 Litres, but this can be set in increments of 1,000 Litre from 1,000 Litre to 10,000 Litres. When a filter change is due, the Change Filter light will flash white once a minute and remain so until reset. A filter status light is located between the Red and Blue Lights on the tap head assembly.

Depending on local water quality conditions and usage, the filter may require changing anywhere from 1,000 Litres to 10,000 Litres.

You may also need to replace the filter if you notice unpleasant odours or tastes.Some water may drip from the filter head (socket) during replacement. Keep a bucket and towel handy to catch drips and mop up any spills.

To change the Filter:
1. Scroll through the screen menu to “Filter Flush Off” this isolates the water supply.
2. Relieve system pressure via the filter flush stop cock, a quick open and close will do.
3. Grasp filter cartridge and twist right to left one quarter turn until it stops.
4. Ease cartridge downwards to detach it from the filter head (socket).
5. Do not tilt the cartridge as dirty water may spill from it if tilted.
6. Unpack replacement cartridge and write today’s date where shown on the label.
7. Avoid touching the filter “O” rings and filter opening as this may cause bacterial contamination of the cartridge.
8. Align cartridge tabs with the slots on the under-side of the filter head.
9. Slide cartridge upward into head and rotate left to right until it stops.
10. Locate the filter flush hose situated behind the filter cartridge and run to a container ready for flushing. Open the flush hose tap lever. On the control panel press adjust <, this will start the water flushing the cartridge. Allow at least 7.5 Ltrs of water to run through to activate the filter and then press adjust < to stop the flow.
11. Isolate the filter flush stop cock and re-fit behind the filter cartridge.
12. Wipe up any spills and dispose of spent filter cartridge and packaging thoughtfully.
13. Scroll through the menu to “Litres filtered”, press adjust < to reset litre counter. Then it asks “are you sure”. Press adjust < again to lock in the command.
14. Scroll through the menu to “Days filtered”, press adjust < to reset days counter to zero. Then it asks “are you sure”. Press adjust < again to lock in the command. After approx 10 seconds it will default to the selected mode.

 

 

 

Compatible with ZIP Water Filter Part # 91292 Gauranteed to fit the genuine 91292 product. 

The carbon in the filter absorbs all kinds of nasties, but only has a certain capacity to do so. Once capacity is reached, it loses it effectiveness to absorb things like chlorine which affects the taste and smell.

Important to replace every every 6-12 months! It is not advisable that a filter cartridge is used beyond its recommended life.




 

ZIP REPLACEMENT FILTER 91292 SPECIFICATIONS:
Filter Type:Carbon & Sediment Combination Filter.
Fits: Zip 912 filter heads
Filter micron rating: ~5 micron
Impurities Reduction:
- Reduces Chlorine which causes bad taste and odour.
- Reduces offensive contaminants like asbestos, rust and dirt and general sediment.
- Reduces Limescale – saves energy consumption; heating elements last longer.
- Does NOT remove fluoride
Capacity: 11,355 litres 
Replacement Cycle:
- For Commercial, High Volume siteslike coffee machines in a retail/restaurant environment,replace every 6 months.
- For more domestic or lower volume sites–replace every 12 months.
- Or when rated capacity of 11,355 litres is reached
- When water pressure drops below 10 psi (often due to excessive sediment which can block the filter up sooner)
- When there is an off-taste in the water
Operating temperature range: 0.6°C - 33°C
Note:Not to be used with hot water (through filter)
Installation:Must be installed vertically, using shortest possible length of tubing, with pressure reducing and check valve inline before filter. (Operating pressure 172 to 860 kPa)
Flush: at full flow for 10 minutes to purge air and clear carbon fines before use
Dimensions: 23cm (length) x 8.25cm (diameter)

Water Filter Reduces the Following Health Related Contaminants:
97.60% of Chlorine Taste and Odour
98.40% of Particulates (Class I)
96.60% of Mercury at pH 6.5
88.90% of Mercury at pH 8.5
99.30% of Lead at pH 6.5
99.40% of Lead at pH 8.5
99.99% of Cysts
98.70% of Carbofuran
99.80% of p-Dichlorobenzene
99.00% of Asbestos
96.40% of Benzene
98.60% of Turbidity

Model # ZIP912 ZIP912 / ZIP150520 ZIP500

 

 

 

 

 

 

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.

Just email: info@waterfilterforfridge.com.au (please allow for freight component)

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

waterfilterforfridge.com.au

We are the cheapest fridge part dealer in Australia

 

ebay_water_filter_for_fridge_Body_Paymenebay_water_filter_for_fridge_Body_Feedba

Compatible Models

Please refer to the product description above for compatible filter numbers, refrigerator models, and system model information.

If you cannot find your model number or are unsure whether this product is suitable for your system, please contact us before purchasing.

Contact Us for Compatibility Support

Installation Guide

Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.

General water filter installation guide for refrigerator, under sink and whole house filters

Need Help Finding the Correct Filter?

Before ordering, compare your old filter, check the model number or filter code, and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.

Water Filter Distributors order guide and product support information

Whole House System Installation Manual

For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.

View Whole House Installation Manual

Twin Cartridge Under Sink Installation Guide

For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.

Twin cartridge under sink water filter installation guide

Important Notes

  • Filter location and replacement steps may vary depending on your appliance or system model.
  • Flush approximately 5–10 litres or 3–5 minutes of water after installation.
  • Use with cold potable water only.
  • Check for leaks after installation and reinstall if necessary.
  • Always follow your appliance manufacturer's instructions.

Certification & Quality Assurance

Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.

Water Filter Distributors certification and quality assurance information Aqua Blue H2O warranty information

Important Certification Notice

  • Certification details may vary depending on the specific product model.
  • Please refer to the product description, packaging or official documentation for model-specific certification information.
  • If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.